Skip to content

Fleetservice

General information

Here you will find general status information about your router and the current synchronization status of the configuration.
Click on "Refresh" to update the information. If "Automatic update" is activated, the information is updated every 60 seconds.

Current status of the configuration

Here you can see when the router last carried out a check-in, the origin of the last changes and whether the configurations are synchronized or whether there is a conflict.

Conflict resolution

If the status "Conflict" is displayed, the stored configuration and the configuration of the router differ.
This can happen, for example, if a setting has been changed via the Fleetservice and a setting on the router itself has been changed before the router can accept this change. In this case, you can use the "Accept current router configuration" button to accept the configuration from the router and return the status to synchronous.

Router device information

This information can be requested from the router if required and shows

  • the firmware version
  • Overview of the memory space
  • the local time of the router
  • the online time of the router
  • Daily and monthly consumption via the WAN interface

General information about the router

Here you can see how long the router has been registered in Fleetservice and whether the fair use conditions have been accepted on the router.

GPS data (optional)

If GPS is activated on the router, the router sends its current location during a check-in.
You have the option of displaying the position on a map.

View logs

You can view the router's log here. By clicking on "Request new system log", the router will send its log at the next check-in.

Configuration

Here you can view the current configuration of your router. Click on "Create new configuration draft" to switch to edit mode for the configuration.
In edit mode, you have the option of changing the settings for the WAN/LAN/mobile interfaces and settings for the VPN connection.

Note

To finalize the changes to the configuration and send them to the router, you must click on the "Submit draft" button after all the desired changes have been made. "Submit draft" button.
The router will apply the new configuration at its next check-in.
If you want to discard a draft, click on "Delete draft"

LAN

Here you can adjust the settings of the LAN interface(s), such as IP addresses, firewall zone and the DHCP configuration.
You can also change the assignment of the Ethernet ports here.

WAN

Here you have the option of making settings for the WAN interfaces. Different settings are available depending on the selected interface type.

VPN

Here you can set the proxy port and the key switch behavior of the two VPN channels.

Mobile radio

Here you can select the primary SIM card, switch the automatic switching of the SIM cards on or off and set up the access data for both SIM cards.

Execute commands

VPN1/VPN2

You can use the actions for VPN1 and VPN2 to switch the VPN connection on or off on both VPN channels.

Reboot

If this action is sent to the router, it restarts itself at the next check-in.

NodeRed

With this action, the router retrieves its NodeRed configuration at the next check-in.

Send certificates to the router

This action can be used to manually trigger the automatic download of certificates by the router.